Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WLC 2100 no console

I have a fairly simple WLC 2100 configured to control two APs. We had a power outage a few days ago, and though the WLC was on a surge protector, it did not come back up properly after the outage. The STATUS light sticks at amber and I can't get any console response. At this point I'm not sure what to do except replace the WLC, though I'm loathed to do that as our budget was just cut substantially for next year and we're trying to turn nickels into pennies.

Thanks much!

Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

WLC 2100 no console

You should be fine with getting it RMA'd:

http://www.cisco.com/en/US/docs/general/warranty/English/LH2DEN__.html

-Scott
*** Please rate helpful posts ***
4 REPLIES
Hall of Fame Super Silver

WLC 2100 no console

You should be fine with getting it RMA'd:

http://www.cisco.com/en/US/docs/general/warranty/English/LH2DEN__.html

-Scott
*** Please rate helpful posts ***
New Member

WLC 2100 no console

Thanks for the prompt reply. Now I have to go digging through paperwork looking for when it was purchased and from whom! Just started working here 9 months ago...

Hall of Fame Super Silver

WLC 2100 no console

Should still be under your company hoepfully.  Since its not past 5 years of EOL you will be able to RMA that device.

-Scott
*** Please rate helpful posts ***
Hall of Fame Super Silver

WLC 2100 no console

Take a look at this thread... you should just be able to call it in I would think:

https://supportforums.cisco.com/message/3495435#3495435

-Scott
*** Please rate helpful posts ***
946
Views
5
Helpful
4
Replies
CreatePlease login to create content