Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

WLC 2112 is not accessable

Hello Experts,

I have a problem with my Cisco WLC 2112.

Problems:

1. I can not reach this WLC via GUI or CLI.

2. Can not access via Console.

3. Status LED is Dark Orange or Red.

Can anybody help.

Regards

Everyone's tags (2)
3 ACCEPTED SOLUTIONS

Accepted Solutions
VIP Purple

Re: WLC 2112 is not accessable

Hi,

Status LED is Amber(ORANGE/RED)— Means Problem encountered during boot.

http://www.cisco.com/en/US/docs/wireless/controller/2100/quick/guide/ctrl206q.html#wp39363

Did u tried with these settings:

9600 baud

8 data bits

No flow control

1 stop bit

No parity

If the console is not responsive, then its a hardware failure and you should contact the TAC or You should RMA'd it.

Be aware: WLC 2100 Series are EOL/EOS.

http://www.cisco.com/en/US/prod/collateral/wireless/ps6302/ps8322/ps7206/ps7221/end_of_life_notice_c51-691053.html

Regards

Dont forget to rate helpful posts

Hall of Fame Super Silver

Re: WLC 2112 is not accessable

Your WLC is dead. The status light is in alarm, so nothing you can do to fix that as that device is EOS also.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
VIP Purple

Re: WLC 2112 is not accessable

Ok,

Power down the WLC and then power it back up and then see if the WLC comes back up and then try replacing the power supply and see.. if  still face the issue, then u have to buy new one 25500 or 5500 series.

Regards

Dont forget to rate helpful posts

6 REPLIES
VIP Purple

Re: WLC 2112 is not accessable

Hi,

Status LED is Amber(ORANGE/RED)— Means Problem encountered during boot.

http://www.cisco.com/en/US/docs/wireless/controller/2100/quick/guide/ctrl206q.html#wp39363

Did u tried with these settings:

9600 baud

8 data bits

No flow control

1 stop bit

No parity

If the console is not responsive, then its a hardware failure and you should contact the TAC or You should RMA'd it.

Be aware: WLC 2100 Series are EOL/EOS.

http://www.cisco.com/en/US/prod/collateral/wireless/ps6302/ps8322/ps7206/ps7221/end_of_life_notice_c51-691053.html

Regards

Dont forget to rate helpful posts

Community Member

Re: WLC 2112 is not accessable

Thanks for your quick Help.

Yes I have tried with these setting but still not able to access.

VIP Purple

Re: WLC 2112 is not accessable

Ok,

Power down the WLC and then power it back up and then see if the WLC comes back up and then try replacing the power supply and see.. if  still face the issue, then u have to buy new one 25500 or 5500 series.

Regards

Dont forget to rate helpful posts

Community Member

Re: WLC 2112 is not accessable

Thanks....I will try to buy new one .

Thanks again  for all your quick help.

Hall of Fame Super Silver

Re: WLC 2112 is not accessable

Your WLC is dead. The status light is in alarm, so nothing you can do to fix that as that device is EOS also.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Community Member

Change the RAM, will sort the

Change the RAM, will sort the Boot issue :) 2 years late lol

982
Views
0
Helpful
6
Replies
CreatePlease to create content