Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WLC 2125 issue

Hello,

I have installed a Cisco WLC 2125 and 15 LAP 1121G for an enterprise that has 130 users connected to the wireless network. There are many application servers on the local network and the users have problem of throughput when they download files from servers.

I think the problem is on the choice of the controller witch have one uplink 100 mbps to the network.

So I would like to know if there is a solution with this controller or I must use a WLC 4402-25 witch have two uplink gigabit ports.

Thank you.

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: WLC 2125 issue

Since the 2100 series controllers don't support LAG, your only option with them is to purchase additional ones and load-balance. If you're going to invest the money, however, you're right to say that you should move to 4400s.

What is your throughput % on that link? If you use wireless heavily, it wouldn't surprise me if you're hitting over 100Mbps with 15 APs, but it's good to check in case there's something else going on here.

2 REPLIES
Silver

Re: WLC 2125 issue

Since the 2100 series controllers don't support LAG, your only option with them is to purchase additional ones and load-balance. If you're going to invest the money, however, you're right to say that you should move to 4400s.

What is your throughput % on that link? If you use wireless heavily, it wouldn't surprise me if you're hitting over 100Mbps with 15 APs, but it's good to check in case there's something else going on here.

New Member

Re: WLC 2125 issue

Thank you

199
Views
0
Helpful
2
Replies