Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WLC 2500 series with Cisco AIR-SAP1602I-C-K9

Hello all..

my name is Oji, and I would like to ask something about wlc and ap...

I have WLC 2500 series and I would like to join WLC 2500 series with Cisco Access Point AIR-SAP1602I-C-K9 (with IOS inside).

is that possible?

because as far as I know, AP that want  to join to WLC, must don't have an IOS inside.. 
 

 

Regards

Everyone's tags (1)
2 REPLIES
Hall of Fame Super Gold

As long as your WLC is

As long as your WLC is running a minimum of 7.4.100.X firmware.  


Can you also post the output to the WLC command of "sh sysinfo"?

VIP Purple

Paste the output of these

Paste the output of these commands:

 

sh sysinfo from WLC

sh version from AP

Make sue that your WLC must have atleast 7.4.100.0 version (Will recommand to use 7.4.121.0- this is the stable version)

Regards

103
Views
0
Helpful
2
Replies