Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WLC 2504 and HP Procurve

Having an issue with connecting the WLC to an HP

Vlan 1 data

Vlan 2 voice

Vlan 10 WLC

What are the settings on the HP to connect to the WLC?

2 REPLIES

WLC 2504 and HP Procurve

To an extent it depends on the config of the management interface.  If you have the management set to be 0, then:

Tag 1

Tag 2

no tag 10.

If you have all interfaces tagged then,

notag 1

tag 2

tag 10.

HTH,

Steve

----------------------------------------------------------------------------------------------------------

Please remember to rate helpful posts or to mark the question as answered so that it can be found later.

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

WLC 2504 and HP Procurve

The Management is set to untagged. So the first settings group is what the switch is set to.  I will pass this one, thanks.

624
Views
0
Helpful
2
Replies
CreatePlease login to create content