Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WLC 2504 Flash & Memory Size require

Hi

Can anybody pls share how to check WLC 2504 Flash & Memory Size

Over GUI/CLI/ Or pls share the spec sheet

Thanks,

Subhojit                  

1 REPLY
Hall of Fame Super Silver

Re: WLC 2504 Flash & Memory Size require

Boot up the WLC and look at the boot up process. That will show you it or else you can see it in this link.

http://www.cisco.com/en/US/docs/wireless/controller/2500/quick/guide/ctr2504_q_s.html#wp48975

Board Revision 0.0 (SN: PSJ143302MT, Type: AIR-CT2504-K9) (P)
Verifying boot loader integrity... OK.
OCTEON CN5230C-SCP pass 2.0, Core clock: 750 MHz, DDR clock: 330 MHz (660 Mhz data
rate)
CPU Cores: 4
DRAM: 1024 MB
Flash: 32 MB
Clearing DRAM........ done
Network: octeth0', octeth1, octeth2, octeth3
' - Active interface
E - Environment MAC address override
CF Bus 0 (IDE): OK
IDE device 0:
- Model: 1GB CompactFlash Card Firm: CF B612J Ser#: C181101244A1Yb3A5QNU
- Type: Hard Disk
- Capacity: 977.4 MB = 0.9 GB (2001888 x 512)

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
479
Views
0
Helpful
1
Replies