Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

WLC 2504 with AP 3502

Hello all, i need your help, i have a WLC but AP's not joined with controller,  this errors sends:

cisco AIR-CAP3602I-N-K9    (PowerPC) processor (revision A0) with 167926K/81920K bytes of memory.

Processor board ID FTX1734GJ9E

PowerPC CPU at 800Mhz, revision number 0x2151

Last reset from power-on

LWAPP image version 7.3.1.53

1 Gigabit Ethernet interface

32K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address: 7C:69:F6:1A:2A:C4

Part Number                          : 73-14521-02

PCA Assembly Number                  : 800-37501-02

PCA Revision Number                  : A0

PCB Serial Number                    : FOC17306LVB

Top Assembly Part Number             : 800-35852-02

Top Assembly Serial Number           : FTX1734GJ9E

Top Revision Number                  : C0

Product/Model Number                 : AIR-CAP3602I-N-K9  

% Please define a domain-name first.

*Aug  1 18:34:32.035: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER

*Aug  1 18:34:32.035: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'WLAN_EstrellaR'running version 7.0.220.0 is rejected.

*Aug  1 18:34:32.035: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.

*Aug  1 18:34:32.035: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2.

*Aug  1 18:34:32.035: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller

*Aug  1 18:34:32.035: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 10.4.14.201

*Aug  1 18:34:32.035: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'WLAN_EstrellaR'running version 7.0.220.0 is rejected.

*Aug  1 18:34:32.035: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.

*Aug  1 18:34:32.035: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2.

Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)

*Aug  1 18:34:42.035: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER

*Aug  1 18:34:42.035: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'WLAN_EstrellaR'running version 7.0.220.0 is rejected.

*Aug  1 18:34:42.035: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.

*Aug  1 18:34:42.035: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2.

*Aug  1 18:34:42.035: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller

*Aug  1 18:34:42.035: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 10.4.14.201

Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

Re: WLC 2504 with AP 3502

Hi Martin

Martin Velazquez wrote:

Hello all, i need your help, i have a WLC but AP's not joined with controller,  this errors sends:

cisco AIR-CAP3602I-N-K9    (PowerPC) processor (revision A0) with 167926K/81920K bytes of memory.

*Aug  1 18:34:42.035: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'WLAN_EstrellaR'running version 7.0.220.0 is rejected.

U need atleast 7.1.91.0 version on controoler .

3600 series AP  first suppourt is

CAP3602I

7.1.91.0

Update firmaware on wlc.

also paster sh sysinfo from WLC.

matrix compatibiolity: http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html

Regards

4 REPLIES
VIP Purple

Re: WLC 2504 with AP 3502

Hi Martin

Martin Velazquez wrote:

Hello all, i need your help, i have a WLC but AP's not joined with controller,  this errors sends:

cisco AIR-CAP3602I-N-K9    (PowerPC) processor (revision A0) with 167926K/81920K bytes of memory.

*Aug  1 18:34:42.035: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'WLAN_EstrellaR'running version 7.0.220.0 is rejected.

U need atleast 7.1.91.0 version on controoler .

3600 series AP  first suppourt is

CAP3602I

7.1.91.0

Update firmaware on wlc.

also paster sh sysinfo from WLC.

matrix compatibiolity: http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html

Regards

New Member

WLC 2504 with AP 3502

ok, try to do upgrade and confirm the results, thanks.

New Member

WLC 2504 with AP 3502

Thanks, sandeepchoudhary21.

VIP Purple

Re: WLC 2504 with AP 3502

Can u please mark this question as answered, it may help others.

Regards
Don't forget to rate helpful posts

Sent from Cisco Technical Support iPhone App

307
Views
0
Helpful
4
Replies
CreatePlease to create content