Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

WLC 4400 question

hello,

I have a question: Can WLC 4400 management Bridges?


Can you show me a document where mention this point?

Thanks a lot,

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: WLC 4400 question

WLC's can only manage LAP's that are either setup in Local mode or in H-REAP mode.  Now if you are doing MESH bridging then yes, any other type of IOS based bridging then no.

-Scott
*** Please rate helpful posts ***
7 REPLIES
Hall of Fame Super Gold

Re: WLC 4400 question

Community Member

Re: WLC 4400 question

As far as I know Cisco Workgroup Bridges (WGB) doesn`t support LWAPP. Therefore It could not be registered in the WLC.

http://www.cisco.com/en/US/products/hw/wireless/ps441/products_qanda_item09186a0080094644.shtml

any other ideas??

Regards,

Hall of Fame Super Silver

Re: WLC 4400 question

WLC's can only manage LAP's that are either setup in Local mode or in H-REAP mode.  Now if you are doing MESH bridging then yes, any other type of IOS based bridging then no.

-Scott
*** Please rate helpful posts ***
Community Member

Re: WLC 4400 question

Hi,

I really not familiar with Cisco system, i really need help here. Here the situation, i have 1 unit WLC4400 and 7 unit AIR-LAPP1522. How to start? What should i do 1st? My company gave me to install at cointainer yard. I checked from the online manual, looks like there have web browser configuration, how to enter that web?

please advise what should i do 1st? attach is the topology that my company asked to do it.really need help.

tq

Hall of Fame Super Gold

Re: WLC 4400 question

Community Member

Re: WLC 4400 question

Hi,

I cant enter the link that you have post to me. Maybe not authorize?

Please help.Tq

Community Member

Re: WLC 4400 question

Hi,

I faced 1 problem with my WLC 4400 and RAP. Before this, my mesh network working fine for few month. But now my RAP (LWAPP1522) not joined (status) to controller. Its happen on 2nd Oct 2011. I checked from the log there have few error.

*Oct 24 23:13:58.850: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:2171 Failed to complete DTLS handshake with peer 130.1.65.232

*Oct 24 15:04:55.644: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:2171 Failed to complete DTLS handshake with peer 130.1.65.232

*Oct 24 14:56:46.641: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:2171 Failed to complete DTLS handshake with peer 130.1.65.232

*Oct 24 14:53:02.238: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:2171 Failed to complete DTLS handshake with peer 130.1.65.232

*Oct 24 14:51:58.038: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:2171 Failed to complete DTLS handshake with peer 130.1.65.232

*Oct 24 14:49:03.435: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:2171 Failed to complete DTLS handshake with peer 130.1.65.232

*Oct 24 14:47:46.835: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:2171 Failed to complete DTLS handshake with peer 130.1.65.232

*Oct 24 14:43:30.232: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:2171 Failed to complete DTLS handshake with peer 130.1.65.232

*Oct 24 14:40:28.629: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:2171 Failed to complete DTLS handshake with peer 130.1.65.232

*Oct 24 14:39:17.629: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:2171 Failed to complete DTLS handshake with peer 130.1.65.232

*Oct 24 14:37:32.629: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:2171 Failed to complete DTLS handshake with peer 130.1.65.232

*Oct 24 14:32:56.026: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:2171 Failed to complete DTLS handshake with peer 130.1.65.232

*Oct 24 14:31:54.023: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:2171 Failed to complete DTLS handshake with peer 130.1.65.232

*Oct 24 14:28:56.423: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:2171 Failed to complete DTLS handshake with peer 130.1.65.232

*Oct 24 14:28:22.823: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:2171 Failed to complete DTLS handshake with peer 130.1.65.232

*Oct 24 14:25:59.820: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:2171 Failed to complete DTLS handshake with peer 130.1.65.232

*Oct 24 14:25:10.220: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:2171 Failed to complete DTLS handshake with peer 130.1.65.232

*Oct 24 14:17:34.017: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:2171 Failed to complete DTLS handshake with peer 130.1.65.232

*Oct 24 14:14:28.415: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:2171 Failed to complete DTLS handshake with peer 130.1.65.232

*Oct 24 14:07:25.008: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:2171 Failed to complete DTLS handshake with peer 130.1.65.232

*Oct 24 14:05:36.808: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:2171 Failed to complete DTLS handshake with peer 130.1.65.232

*Oct 24 14:04:22.208: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:2171 Failed to complete DTLS handshake with peer 130.1.65.232

*Oct 24 14:01:09.605: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:2171 Failed to complete DTLS handshake with peer 130.1.65.232

*Oct 24 13:58:51.405: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:2171 Failed to complete DTLS handshake with peer 130.1.65.232

*Oct 24 13:55:20.402: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:2171 Failed to complete DTLS handshake with peer 130.1.65.232

and this error to

Controller time base status - Controller is out of sync with the central timebase.

Whys its happen? please help me

912
Views
0
Helpful
7
Replies
CreatePlease to create content