Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WLC 4402

I have a WLC 4402 and reading it says it can handle 12, 25,or 50 AP's.  How can I tell how many my appliance will actually controll?

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: WLC 4402

On the Monitor page in the gui at the top right above the image of the controller you will see the number of APs supported. (at least in 4.2.207.0 anyway). Or you can do a "show sysinfo" from the CLI.

-John

2 REPLIES
Bronze

Re: WLC 4402

On the Monitor page in the gui at the top right above the image of the controller you will see the number of APs supported. (at least in 4.2.207.0 anyway). Or you can do a "show sysinfo" from the CLI.

-John

New Member

Re: WLC 4402

Thanks John

219
Views
0
Helpful
2
Replies