01-02-2012 04:55 AM - edited 07-03-2021 09:19 PM
Hi everyone!
Question is simple, but I cannot find it in google.
Does WLC 5508 support AIR-LAP1042N?
Reagrds,
Aleksei
01-02-2012 05:41 AM
Yes it is supported on the 5508. It depends on the code version and if he wlc supports that code. See the link.
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_0_116_0.html#wp610751
Sent from Cisco Technical Support iPhone App
01-02-2012 05:50 AM
Thank You,
In other words I need Cisco Unified Wireless Controller SW Release 7.0 for WLC 5508 to make these two things operate with each other.
01-02-2012 05:52 AM
You are correct.
Sent from Cisco Technical Support iPhone App
01-02-2012 06:12 AM
One more question.
What poe injector is supported on AIR-LAP1042N?
I have found poe injectors for other APs.
1.AIR-PWR-B= |
2.AIR-PWRINJ4 |
Will anyone of these support this AP?
01-02-2012 06:17 AM
Either one will work:
Powering Options
• 802.3af Ethernet Switch
• Cisco AP1040 Power Injectors (AIR-PWRINJ4=)
• Cisco AP1040 Local Power Supply (AIR-PWR-B=)
http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps11203/data_sheet_c78-609338.html
01-02-2012 06:19 AM
Big Thanks
01-02-2012 06:17 AM
should work with the PWRIINJ4 for the injector. The PWR-B for hard power
Sent from Cisco Technical Support iPhone App
01-02-2012 05:46 AM
Yes, the 5508 supports the 1042, so long as the code you are running supports them, which starts with 7.0.98.0
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_0_116_0.html#wp767176
HTH,
Steve
Sent from Cisco Technical Support iPad App
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: