Welcome to Cisco Support Community. We would love to have your feedback.
For an introduction to the new site, click here. And see here for current known issues.
I have old 4400 series wlc and recently I have configured 5508 wlc and 6 new Access Point.
when you go to MONITER - AP Join their it shows connected AP detail with AP IP address but if u see it in under WIRELESS Option their is not showing any AP's detail.
I mean to say that AP's are connecting with WLC and also getting IP address but unable to regester with WLC.
Even I have checked with remove Radius configuration also from wlc as well as from acs.
Provide a AP console output when it is booting up & trying to register, that will tell us what's going on
What AP model is this ? which WLC software version you running ?
Just to add, make sure everything is compatible by referencing the matrix.http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.htmlSent from Cisco Technical Support iPhone App
Post the output to the following commands:
1. WLC: sh sysinfo;
2. WLC: sh time;
3. AP: sh version;
4. AP: sh ip interface brief; and
5. AP: sh inventory
Im not able to post info it says below msg, plesse suggest how i can provide detail.
This message can not be displayed due to its content. Please use the contact us link with any questions.
Also I like to say that after factory rest 4 out of 6 is done now 2 remain.
You can attach a text file in your Main post.