Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WLC 5508 IOS 6.0

is it possible to manage AP's over WAN with a 5508 running IOS 6.0?

If so can you point me to where I can read this config item in the 6.0 config documentation.

 

thanks

  • Getting Started with Wireless
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

It's called H-REAP or

It's called H-REAP or FlexConnect.

 

Go HERE.

 

Please don't forget to rate our useful posts.  

8 REPLIES
Hall of Fame Super Gold

It's called H-REAP or

It's called H-REAP or FlexConnect.

 

Go HERE.

 

Please don't forget to rate our useful posts.  

New Member

LeoThank you very much!

Leo

Thank you very much!

VIP Purple

adding to LEO :)H-Reap Design

adding to LEO :)

H-Reap Design and Deployment Guide

http://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/71250-h-reap-design-deploy.html

 

H-REAP Modes of Operation Configuration Example

http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/81680-hreap-modes.html

 

Regards

New Member

Thanks for the linksThe first

Thanks for the links

The first thing I noticed is that H-Reap does not support the models that we have at our sites;1200's.

So I guess we need to upgrade.

VIP Purple

hi,FlexConnect is only

hi,

FlexConnect is only supported on these components:

1130AG, 1140, 1240AG, 1250, AP801, 1600, 2600, 3500I, 3500E, 3600, 1040, 1520, 1550, and 1260 APs
Cisco Flex 8500 and 7500, Cisco 5500, 4400, and 2500 Series Controllers
Catalyst 3750G Integrated WLC Switch
Cisco WiSM and WiSM2
Controller Network Module for Integrated Services Routers

 

check this link:

http://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/112042-technote-product-00.html

 

Regards

Dont forget to rate helpful posts

New Member

One other questionI now have

One other question

I now have a lightweight that I wish to place at a remote location. This lightweight is currently operating on the local network. Can I take that LAP and place at the remote location and expect that it will discover the controler and operate as a remote unit at the remote site?

VIP Purple

Yes you can connect at remote

Yes you can connect at remote location but make sure that AP is getting IP either statically or via DHCP and can discover the WLC.

 

Regards

Dont forget to rate helpful posts

Yes, it can be managed

Yes, it can be managed through H-reap ie flexconnect.

45
Views
0
Helpful
8
Replies