Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WLC 5508 with 3502i AP implementation

Hi,

I have task to install and configure the cisco WLC 5508 with 3502i AP on client place but before that I need to collect the data from client for existing set-up so that it would smooth to install and configure.

I have worked on Wism 6504 with 1010 AP. I have practical experience on wireless but this is first time , i am going from scratch to implement.

what are all inputs need to collect from client end ?

how to go about installation and configuration ?

It would be always better to collect the necessary data before proceeding.

Please guide me to proceed for implementation.

It would be appreciative to get knowledge on this.

  • Getting Started with Wireless
2 REPLIES
Cisco Employee

Re: WLC 5508 with 3502i AP implementation

Hi Vinod,

Here are a few guides that should help in your installation:

Cisco Wireless LAN Controller Configuration Guide, Release 7.0
http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70.html

Lightweight AP (LAP) Registration to a Wireless LAN Controller (WLC)
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a00806c9e51.shtml

Please feel free to post any specific questions to the boards to get a more detailed explaination.

Best,

Drew

Hall of Fame Super Gold

Re: WLC 5508 with 3502i AP implementation

Get a wireless site survey done.

1151
Views
0
Helpful
2
Replies