I see something like this in the Data Sheet of 8510 "A wireless policy engine on the Cisco 8500 Series enables profiling of wireless devices and enforcement of policies such as VLAN assignment, QoS, access control lists (ACLs), and time-of-day- based access." I wonder if does WLC 8500 has time-based ACL support, or data sheet is talking about anything else?
You want a straight answer or you want an answer coming out from the SALES team?
Sales team will say "YES". Will it be effective? Not one bit. You go to Security > Local Policy. You create a Local Policy (and attached to your SSID) and determine what time/day you want specific criterea (like wireless client manufacturer).
However, if you want what time/day you want the SSID to go down or UP, then you'll need something more robust, like a Layer 3 ACL.
If you want something like a time/day you want the radio(s) of the AP to go down/up then you need something like EnergyWise or WCS/NCS/PI.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...