Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

wlc aaa acounting interval

Hello,

I have WLC 5508 in software version 7.2.111.3 and I would like to know, if there is possibility to configure accounting update interval for stop time. Because I have problem with obtaining stop time in accurate time, I received it with delay in about half hour. I know that on cisco switch is possibility to force that stop time and have it in time when user is disconnected.

Thanks for any advance.

prosím
sloveso potešiť,páčiť sa,chcieť,tešiť
Detect language » Slovak
Hello
1 REPLY
Bronze

wlc aaa acounting interval

config wlan radius_server acct interim-update

To configure the interim update of a RADIUS accounting server of a WLAN, use the config wlan radius_server acct interim-update command.

config wlan radius_server acct interim-update {interval | enable | disable} wlan_id

Syntax Description

interim-update

Configures the interim update of the RADIUS   accounting server.

interval

Interim update interval that you specify.   The valid range is 180 seconds to 3600 seconds.

enable

Enables interim update of the RADIUS   accounting server for the WLAN.

disable

Disables interim update of the RADIUS   accounting server for the WLAN.

wlan_id

Wireless LAN identifier between 1 and 512.

Command Default

Enabled at 600 seconds.

Examples

This example shows how to specify an interim update of 200 seconds to a RADIUS accounting server of WLAN 2:

> config wlan radius_server acct interim-update 200 2

Related Commands

config 802.11a enable
config 802.11a disable
config 802.11b enable
config 802.11b disable
config 802.11b 11gSupport enable
config 802.11b 11gSupport disable
show wlan

For more information and technical knowledge, please check the below link:

Link-1:

http://www.cisco.com/en/US/docs/wireless/controller/7.2/command/reference/cli72commands.html#wp1324639

Link-2:

http://www.cisco.com/en/US/docs/wireless/controller/7.2/command/reference/cli72commands.html#wp1320025

441
Views
5
Helpful
1
Replies
CreatePlease login to create content