WLC and AP, DHCP at Remote-Config

[Rajan R]

Hey Guys,

City A is the data center with 2 WLC (CT2504-K9) and a number of APs. City B is a branch with MPLS between A and B. Right now the APs at City B has joined the controller. Users at B is getting ip's assigned from DHCP at City A. How do I configure the WLC so users can get ip's assigned from DHCP server present at B. Option 43 is enabled.

Thanks

Varadarajan.R

[Scott Fella · Accepted solution]

You need to configure the AP's in h-reap or FlexConnect which it is called in version 7.2.  This way you can specify what ssid is mapped to what local vlan.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807cc3b8.shtml

http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080736123.shtml

[Rajan R]

Thanks a ton. it worked.