Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WLC and AP, DHCP at Remote-Config

Hey Guys,

City A is the data center with 2 WLC (CT2504-K9) and a number of APs. City B is a branch with MPLS between A and B. Right now the APs at City B has joined the controller. Users at B is getting ip's assigned from DHCP at City A. How do I configure the WLC so users can get ip's assigned from DHCP server present at B. Option 43 is enabled.

Thanks

Varadarajan.R

  • Getting Started with Wireless
Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: WLC and AP, DHCP at Remote-Config

You need to configure the AP's in h-reap or FlexConnect which it is called in version 7.2.  This way you can specify what ssid is mapped to what local vlan.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807cc3b8.shtml

http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080736123.shtml

Thanks, Scott *****Help out other by using the rating system and marking answered questions as "Answered"*****
2 REPLIES
Hall of Fame Super Silver

Re: WLC and AP, DHCP at Remote-Config

You need to configure the AP's in h-reap or FlexConnect which it is called in version 7.2.  This way you can specify what ssid is mapped to what local vlan.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807cc3b8.shtml

http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080736123.shtml

Thanks, Scott *****Help out other by using the rating system and marking answered questions as "Answered"*****
New Member

WLC and AP, DHCP at Remote-Config

Thanks a ton. it worked.

700
Views
0
Helpful
2
Replies