1. A Cisco WLC is connected to a Switch. 2 LWAPs (AP1 and AP2) are connected to that Switch. 2 SSID's (SSID 1 and SSID 2) are defined on the WLC. SSID 1 is tied to VLAN 1 and SSID 2 is tied to VLAN 2. Here is my question:
How would you manage the WLC to send only SSID 1 to AP1 so every client that connects to AP1 becomes a member of VLAN 1?
In my real world project, each building will have a switch with tons of APs connected to. I want all the users at buliding A to be in VLAN 1 (ONE subnet) and that's it.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...