Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

WLC controller license checkup

Hello guys,

I recently bought a Cisco 5508 WLC with SWC5500LPE-K9-70 and a Cisco 1262 AP with AIR-OPT60-DHCP vender class identifier .How can I check wether the SWC5500LPE-K9-70 is included on the 5508 wlc and AIR-OPT60-DHCP on the 1262 ap?

Everyone's tags (5)
5 REPLIES
Hall of Fame Super Silver

WLC controller license checkup

Option 60 is what you configure on the dhcp and it really isn't required.  That part# you have is without the DTLS license.... is that what you want.

If a customer chooses SWC5500K9-60, SWC5500K9-70 or SWC5500K9-72, DTLS Data Encryption is enabled by default. When a customer orders the 5500 and chooses either SWC5500LPE-K9-70 or SWC5500LPE-K9-72 in the Optional Licenses TAB, data DTLS Encryption is disabled.

-Scott
*** Please rate helpful posts ***
New Member

WLC controller license checkup

Thanks Scott,

My client wants to see if SWC5500LPE-K9-70 license is included or not on the controller.

Hall of Fame Super Silver

WLC controller license checkup

Look at table 5 for the license part #

http://www.cisco.com/en/US/prod/collateral/wireless/ps6302/ps8322/ps10315/data_sheet_c78-521631.html

-Scott
*** Please rate helpful posts ***
New Member

WLC controller license checkup

hi scott

the part no. is L-LIC-CT5508-50A but my question is how can i show the clinet from the controller this licence is included on the device or  not? is there any show command to use from the controller CLI?

Hall of Fame Super Silver

Re: WLC controller license checkup

You can do a show license all or on the GUI main page shows the number of APs supported.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
693
Views
0
Helpful
5
Replies
CreatePlease to create content