Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

WLC Custom Web Auth Bundle sample .tar file is not on WCS

The WLC documentation would make it appear (or maybe previously) you should download a sample web auth bundle code from the WCS Templates. I was never able to find a sample .tar file on the WCS 7.0.172.0 templates.

However I found on Cisco.com under Support > Downloads > Products >Wireless> Wireless LAN Controller Standalone Controllers> Cisco 5500 Series Wireless Controllers > Cisco 5508 Wireless Controller > Wireless Lan Controller Web Authentication Bundle-1.0.2  > webauth_bundle-1.0.2.zip

It was updated in June 2011, some pretty good sample html code.

The readme.html in the sample webauth_bundle-1.0.2.zip file has been very helpful , almost as good as the suppport community web page on custom web auth.

https://supportforums.cisco.com/docs/DOC-13954

2 REPLIES

WLC Custom Web Auth Bundle sample .tar file is not on WCS

WCS config guide 7.0.172 is correct

http://www.cisco.com/en/US/docs/wireless/wcs/7.0MR1/configuration/guide/temp.html#wp1129979

The bundle in WCS is downloaded through :

configure->controller

"select a command"-> download customized webauth bundle.

Just tested it and it was there.

The one on cisco.com is better though

WLC Custom Web Auth Bundle sample .tar file is not on WCS

Nicolas is correct is all counts. That is the process in 7.0.172.0 but the web-auth bundle templates you can get off cisco.com are far better and give more options for the web-auth bundle page options.

13710
Views
0
Helpful
2
Replies