You can have multiple wlan ssid's use the management interface if you like or any other dynamic interface you create. If you want the wlan ssid to put users on a different vlan, then you need to configure a dynamic interface for each vlan you need. A interface on the WLC can only be tagged for one vlan and not multiple vlans.
You can configure dynamic vlan assignment to have a radius server smnp a switch and put users on a specific vlan, but you would have to use radius. If you have a guest network and are going to use a splash page, then you will have to create an interface for that.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...