I came across with one issue repetitively. Whenever we have issue with WAN disconnection issue, after some time our LAN WLC gets rebooted .
As I gone through the logs, found that we will have disconnection with Mobility group member <ip address> . Based on that , suspecting we have some policies or some parameter configured therefore whenever we have issue with mobility controller member ( such as disconnection ) .
We have mobility group configured whereas one of our mobility member is on WAN ( other location ).
so whenever we have disconnection issue with mobility member which is there in head-office location , our local LAN WLC gets rebooted.
can anybody look into this? It would be great to know , if we have enabled any feature unknowingly.
Do you mean the tunnel goes down or the actual wlc reboots. So your uptime starts back at zero on the wlc ?
Sent from Cisco Technical Support iPad App
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
Is the reason you require the same mobility group name for a remote site is because you are doing failover between the two? Usually you don't require the same mobility group name unless you want the AP's to be able to failover between multiple WLC's.
I don't think that would fix your issue though. Maybe setup syslog so you can see if the wlc reboots due to another issue or error.
Sent from Cisco Technical Support iPhone App
*****Help out other by using the rating system and marking answered questions as "Answered"*****
We are moving! Please use WLCCA Forum for updates and discussions
[toc:faq] Wireless LAN Controller (WLC) Config Analyzer Download Click
here to Download To request access, send an e-mail to
email@example.com. Please include your Cisco.com userna...
[toc:faq] IntroductionHere is the step by step process that we have to
take care of while converting LWAPP to IOS and then vice versa..LWAPP to
IOSThe hardware used = 1141 AP (make sure we are using the right
[toc:faq] Introduction AnyConnect Secure Mobility Client 3.0: Network
Access Manager & Profile Editor on Windows Summary Use the Cisco
AnyConnect Network Access Manager Profile Editor to build custom
profiles for the AnyConnect Secure Mobility Client. App...