WLC issue

[achalante]

Hi, i just got a Wireless LAN controller 2000 series and a 1200 series Aironet. I have never configured a wireless device before, but from some articles i saw on cisco's website, i thought it would be easy, but i still have some issues. I tried to integrate both devices, by connecting them back-to-back, using the WLC as a DHCP server. The AP was able to get an ip addresses from the WLC, but i still couldn't see the AP on the WLC CLI. I am stuck at the moment, as i dont know what to do next. Thanks.

[Benjamin Solero]

Hi,

You should check the following:

1. Verify the AP is running an LWAPP IOS image. ('show ver' from CLI if you want to post it).

2. Run the following debugs on the controller to help identify the issue:

debug lwapp events enable

debug pm pki enable

Start with these and then more advanced troubleshooting can follow if needed.

-Ben