Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WLC license issue

Hi all,

We have 5508 WLC with 125 base AP license + 100 AP adder license .  Due to some issues , WLC got rebooted and it came up with only 125 AP license. The 100 AP adder license was showing inactive . After we installed the license file now WLC is showing 225 AP licenses . What could be the cause that it made the WLC to not consider the adder license? After installing this license we still didnt rebooted the WLC ? will rebooting the WLC again cause the same issue ? Need your suggestions on this .

outputs are ,

License Store: Primary License Storage

StoreIndex:  0    Feature: base                              Version: 1.0

    License Type: Permanent

    License State: Active, Not in Use

    License Count: Non-Counted

    License Priority: Medium

License Store: Primary License Storage

StoreIndex:  1    Feature: base-ap-count                     Version: 1.0

    License Type: Permanent

    License State: Inactive

    License Count: 100 / 0 (Active/In-use)

    License Priority: Medium

License Store: Primary License Storage

StoreIndex:  2    Feature: base-ap-count                     Version: 1.0

    License Type: Permanent

    License State: Inactive

    License Count: 125 / 0 (Active/In-use)

    License Priority: Medium

License Store: Primary License Storage

StoreIndex:  3    Feature: base-ap-count                     Version: 1.0

    License Type: Permanent

--More-- or (q)uit

    License State: Active, In Use

    License Count: 225 /225 (Active/In-use)

    License Priority: Medium

License Store: Evaluation License Storage

StoreIndex:  0    Feature: base-ap-count                     Version: 1.0

    License Type: Evaluation

    License State: Inactive

        Evaluation total period:  8 weeks  4 days

        Evaluation period left:  8 weeks  4 days

    License Count: 500 / 0 (Active/In-use)

    License Priority: None

after installing the license.png

Thanks,

Vijay.

1 REPLY

WLC license issue

After installing a new license, you need to save the config and do a reboot for that license to 'stick'.

http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70ccfg.html#wp1879816

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
238
Views
0
Helpful
1
Replies