Our WiSM were continuously rebooting for no reason but according to Cisco this was a memory leak that it can actually be fix with this code but since this code is fairly new I wanted to get some feedback before I upgrade.
I'm using this version on new installs (actually comes out of the box with this version). Only hit a couple of issues (funnily enough today).
First was AP's (1142's in this case) with MAC Addresses which don't start with '00' don't register with the WLC. The solution
as provided by TAC is to make sure the AP's are on a different subnet to the WLC Management interface (using Option43 or DNS to specify the WLC management address). There is a fix coming out soon apparently.
I saw the web service on the WLC burp today and stop serving content. I had to restart the unit to fix it up.
I've not been able to search the bug db against this release. The version isn't listed and the 5500 WLC unit's aren't listed either.
Apart from that, things are operating normally as far as I can tell.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...