Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WLC not synchronize with NTP

Hi,

I need some help, I have configured my ntp server server in my WLC but i jut noticed that the time is not syncronized. I am able to ping the ntp server in my WLC. Appreciate if someone can help me to correct this problem.

Thanks,

Jong

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: WLC not synchronize with NTP

Glad to help!

-Scott
*** Please rate helpful posts ***
5 REPLIES
Hall of Fame Super Red

Re: WLC not synchronize with NTP

Hi Jong,

There are some good examples and troubleshooting ideas in this doc;

NTP Configuration and Synchronization for Unified Wireless Network Devices

http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a0080811274.shtml#setup-wlc

Hope this helps!

Rob

New Member

Re: WLC not synchronize with NTP

Hi Rob,

I tried it but still not work. Please see the logs. My WLC is 4hr advanced on my ntp server.

Thanks for your time,

Jong

Hall of Fame Super Silver

Re: WLC not synchronize with NTP

Try this.... On the WLC click on the Commands tab, then Set Time. Set the time zone you are in and hit Set Time Zone. Now set the time manually and hit Set Date and Time. Now click on the Controller tab and then NTP. Set the polling to 3600 and hit apply. Now you can change it back to 86400 or what ever time you want the polling to happen. this will force the time to be accurate.

-Scott
*** Please rate helpful posts ***
New Member

Re: WLC not synchronize with NTP

Wow! great its working now!

Thank you very much

-Jong

Hall of Fame Super Silver

Re: WLC not synchronize with NTP

Glad to help!

-Scott
*** Please rate helpful posts ***
4480
Views
5
Helpful
5
Replies