I have a problem that hopefully you've got and you can help me
We have a WLC 4402 in our network, we have 12 AP's and we have three SSID's that are assigning IP addresses from three different DHCP pools configured in the core router, the situation is that we want one of the SSID's not to assign the IP addresses from the core router, in order to do this we configured a new VLAN and DHCP pool in a layer 3 switch in other segment, when i assign the SSID to the new VLAN with the IP address it can't conmunicate with the VLAN, i mean the SSID that is assign to the new VLAN can't talk with the WLC.
Once i posted the question i found the solution myself
I checked the VLANs and the L3 switches and the results were that the trunks dint allow the VLANs (just as you answered) i wanted, and other minor problems. The WLC dint have any problems at all. (the thing is this network is just implemented and the documentation is not available yet so i dont have a clear vision of the network).
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...