Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WLC ver 7.4 ipads have to re login after they go to sleep.

                   I didnt have this on ver 7.5, is there something I need to do to get this back or do I need to go back to 7.5? 

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

WLC ver 7.4 ipads have to re login after they go to sleep.

Disable the session timer and set the idle timer to 7200 and give that a try.

Thanks,

Scott

*****Help out other by using the rating system and marking answered questions as "Answered"*****

-Scott
*** Please rate helpful posts ***
4 REPLIES
Hall of Fame Super Silver

WLC ver 7.4 ipads have to re login after they go to sleep.

Disable the session timer and set the idle timer to 7200 and give that a try.

Thanks,

Scott

*****Help out other by using the rating system and marking answered questions as "Answered"*****

-Scott
*** Please rate helpful posts ***
Hall of Fame Super Silver

WLC ver 7.4 ipads have to re login after they go to sleep.

By the way... v7.5 is deferred and you might want to look at v7.6, but look at the TAC release version 7.6.101.8

https://supportforums.cisco.com/docs/DOC-40402

If v7.5 is working fine... then leave it.

Thanks,

Scott

*****Help out other by using the rating system and marking answered questions as "Answered"*****

-Scott
*** Please rate helpful posts ***
New Member

WLC ver 7.4 ipads have to re login after they go to sleep.

I am on prime 2.0 so I went bck to 7.4 thinking prime would work better, then take the mse to 7.4 etc. Is there  better train to go with? I have 5508s and 3601 and 3602 Aps

Hall of Fame Super Silver

WLC ver 7.4 ipads have to re login after they go to sleep.

v7.4.121.0 is a good stable code... PI 2.0 supports that version and the MSE can be on v7.4, v7.5 of v7.6, but 7.6 license changes.

Thanks,

Scott

*****Help out other by using the rating system and marking answered questions as "Answered"*****

-Scott
*** Please rate helpful posts ***
101
Views
0
Helpful
4
Replies
CreatePlease login to create content