I set up my WLC 5508 (sw ver 220.127.116.11, field image ver 18.104.22.168) to use Web Authentication against a Cisco ACS server. I have enabled session timeout under the Advanced tab of the WLAN and DHCP lease time as 43200 seconds. When connected to the WLAN, a user sees the login page without any problem. The problem comes when logging after 12 hours has lapsed. If a user has logged after the 12 hours expiry time or even two or three days after, they get the message, "You are already logged in. No further action is required on your part." The internet works fine for them. But I need the user logged out after 12 hours. Any idea why this is happening and how I can fix this issue?
12 hours after, I am still getting the message "You are already logged in. No further action is required on your part." on some of the devices and not all. When I check the Clients list, I don't see the device as connected but it is connected. When I check ACS, I don't see the connected user authenticated against the system. Any idea what's going on here?
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...