Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
Bronze

WLC2504 FUS image version vs IOS image version

Hello,

I assume it is requirement that the FUS image not be newer than the IOS image? Please advise if this is an issue.

Thanks.

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

No, it is not.Typically FUS

No, it is not.

Typically FUS upgrade recommended to latest one even though you are running on 7.4.x or 7.6.x or 8.x codes. 

Here is the latest FUS 1.9.0.0 release notes & go for it as FUS version.

http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/fus_rn_OL-31390-01.html

Typically 30-45 min is required for this upgrade. So arrange a sufficient downtime when doing

 

HTH

Rasika

**** Pls rate all useful responses ****

 

1 REPLY
VIP Purple

No, it is not.Typically FUS

No, it is not.

Typically FUS upgrade recommended to latest one even though you are running on 7.4.x or 7.6.x or 8.x codes. 

Here is the latest FUS 1.9.0.0 release notes & go for it as FUS version.

http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/fus_rn_OL-31390-01.html

Typically 30-45 min is required for this upgrade. So arrange a sufficient downtime when doing

 

HTH

Rasika

**** Pls rate all useful responses ****

 

74
Views
5
Helpful
1
Replies
CreatePlease to create content