Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WLC526 and 1230AP

Can we connect a 1230 AP to the WLC526 provided we convert the AP to LW

3 REPLIES
Hall of Fame Super Red

Re: WLC526 and 1230AP

Hi Naser,

Sadly, the WLC 526 only supports the LAP 521. No other AP Models can be used in this solution.

Q. Which access point products are included in the Cisco Mobility Express Solution?

A. Two Cisco 500 Series Wireless Express Access Point products are in the Cisco Mobility Express Solution; their part numbers follow:

• AIR-AP521G-x-K9 (standalone access point)

• AIR-LAP521G-x-K9 (controller-based access point)

The hardware for these products is the same. The products have different software, but the access points can be converted from standalone mode to the controller-based mode with a simple software upgrade.

http://www.cisco.com/en/US/prod/collateral/wireless/ps7306/ps7319/ps7338/prod_qas0900aecd8060c860_ps7320_Products_Q_and_A_Item.html

As a core element of the Cisco Mobility Express Solution, the mobility controller is built to specifically support the Cisco 500 Series Wireless Express Access Points.

http://www.cisco.com/en/US/products/ps7320/index.html

Hope this helps!

Rob

New Member

Re: WLC526 and 1230AP

Ok, What if I've the AIR-WLC2006-K9 controller, Can the LAP521 be managed through this controller

Hall of Fame Super Silver

Re: WLC526 and 1230AP

184
Views
0
Helpful
3
Replies