WLSE Express - Using internal AAA server to authenticate against LDAP
I'm new to wireless and having some issues trying to set up our WLSE Express (firmware now upgraded to 2.13.1u and talking to 1130AG Aironet APs) to authenticate clients against an LDAP server.
Internal authentication against local Users on the WLSE Express runs fine, but I cannot get it to authenticate against an external LDAP server.
The docs appear to be incorrect in that they state that the LDAP server will return the userpassword to the WLSE, which will then compare it against the one from the client. As far as I know no LDAP server will return the user password.
Does someone have a 'cheat sheet' with the WLSE settings for a working environment please?
Re: WLSE Express - Using internal AAA server to authenticate aga
You need to be more specific about 'post the configuration' please. I am using the web interface. I presume you are talking about the AAA server configuration in the WLSE but there doesn't seem to be any way of saving that to a separate file from the web interface, and the whole WLSE config backup comes out to about 37MB...
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...