Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

WPA on 1242

I am trying to upgrade the encryption on some 1242 access points.  I want to use WPA2.  When I go to set WPA it is requiring an authenication server address.  I don't want to use authenication.  Is there a way to implement WPA without authenication?

Everyone's tags (3)
2 REPLIES
New Member

Re: WPA on 1242

Hi Mark, i think you are using autonomous access point, if you try to configured WPA by web is a little complicated (for me), if you do it by CLI is faster here is a example to configure it:

dot11 ssid SSID-NAME
   authentication open
   authentication key-management wpa
   wpa-psk ascii PASSWORD

int d0

ssid SSID-NAME

int d1

ssid SSID-NAME

i hope this help.

Best Regards,

Milton Tizoc.

New Member

Re: WPA on 1242

Sorry i forgot to put the encyption in the radios

int d0

ssid SSID-NAME

encryption vlan 15 mode ciphers aes-ccm

int d1

ssid SSID-NAME

encryption vlan 15 mode ciphers aes-ccm

Regards,

Milton Tizoc.

2121
Views
0
Helpful
2
Replies
CreatePlease to create content