Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

wpa2 enterprise mode with (local radius) ?

Hi

I’m configuring a Cisco 1240 AP in autonomous mode. dell e5400 notebook w/ intel wifi 5300 agn.

i am testing wpa2 enterprise mode  ap (10.0.0.1)  & notebook(10.0.0.3)    user1 /password1 , user2/password2


i see cisco documents "Wi-Fi Protected Access 2 (WPA 2) Configuration Example "

setting  wpa2 enterprise mode 2

i am  using local radius server.

===================================================================================================

server manager >>  10.0.0.1  1812 & 1813 ports  key: zulu
encryption manger >> aes ccmp
ssid manger >> network eap & open authentication with eap   /   key management:  mandatory wpa:wpav2
security >>  LEAP & 10.0.0.1  key : zulu  /    user1: password1, user2/password2

cli command  change  a littel (because ios version is different)

====================================================================================================


but

wpa enterprise personal mode is good..


error message displya below.

ap#
*Apr 21 01:37:25.157: %DOT11-7-AUTH_FAILED: Station 0021.6a48.38fc Authentication failed


debug message

ap#debug dot11 aaa authenticator all
" see attached file "


thank you

773
Views
0
Helpful
0
Replies
CreatePlease to create content