Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WPA2 on AIR-AP1231G-A-K9

I am trying to setup WPA2 on some 1231 access points which are running IOS version Version 12.3(8)JED

The configuration is something like this:

dot11 ssid WLAN999
   vlan 999
   authentication open
   authentication key-management wpa
   wpa-psk ascii password

Int Dot11Radio0
encryption vlan 999 mode ciphers aes-ccm

ssid WLAN999

This was setup using this example:

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008054339e.shtml

Now on my newer APs (1242s, 1252s, 1141s) the WPA2 configuration looks like this:

dot11 ssid WLAN999
   vlan 999
   authentication open
   authentication key-management wpa version 2
   wpa-psk ascii password

Int Dot11Radio0
encryption vlan 999 mode ciphers aes-ccm

ssid WLAN999

The 1231s will not support the version 2 option at the end of the authentication key-managment command.  Is the 1231 doing WPA2 by virtue of the fact that the ciphers are set to aes-ccm?

Thanks

Mike

2 REPLIES
Cisco Employee

Re: WPA2 on AIR-AP1231G-A-K9

in older code... the WPA 2 option is not der.. but when we configure AES it will act as WPA 2... in latest IOS and all we have the option to select WPA 2

New Member

Re: WPA2 on AIR-AP1231G-A-K9

I've got 12.3(8)JED on them.  There is only one later release available 12.3(8)JED1

.

MK

2971
Views
0
Helpful
2
Replies