Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

wsle 2.13 sntp template

trying to push an sntp template out but is not working, changed time server. using ap1230's with 123-8.ja2 ver ios. it says it completes but nothing changes on ap's

2 REPLIES
Silver

Re: wsle 2.13 sntp template

Hi Dean,

walk to "Configure -> Jobs" select (tick the box) the Job you have created for the SNTP deployment.

Click on "job run details". In the next window click on "Job urn log" in the section "job Runs".

You will get commands executed and a reason for your failure.

Hope that helps.

Best regards,

Frank

New Member

Re: wsle 2.13 sntp template

no errors from wsle job, gives me the following " ---Applying template( time ) configuration to the device" then " ---Successfully applied new configuration" then " ---Configuration update completed successfully !" but when i go to ap's it has old information, nothing changed.

140
Views
0
Helpful
2
Replies
CreatePlease to create content