The following command on the router will display what signatures are loaded: show ip ips signatures. Loaded (unretired) signatures will show with a "Y" in the "Cmp" column of the command output. Additionally, the IPS Signatures GUI in Cisco Configuration Professional (CCP) or Cisco Security Manager (CSM) can show what signatures are loaded (unretired) on the router.
CCP tels me that cant show me signatures because of IOS version, I tryed 124-15T11, 124-24T2 and then 15-1M still same, but because of 128 MB RAM it takes 97% of RAM so I upgraded to 384MB and now all works on any IOS.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...