4215 boot to EBDEBUG:

[m.sir]

IPS with 5.0 version after restart:

CISCO SYSTEMS IDS-4215

Embedded BIOS Version 5.1.7 03/02/04 11:20:35.01

Compiled by dnshep

Evaluating Run Options ...

Check for Valid Disk Image

Embedded BIOS Debugger Invalid Opcode Trap

EAX = 00000000 CS:EIP = 0000:00007DC5 EFL = 00000246 pl ZR .. na .. PE .. nc

EBX = 00007C00 SS:ESP = 0000:00003FB0 EBP = 00000000 .. nt IOPL0 nv up EI ..

ECX = 00000000 DS:ESI = 0000:00000000 FS = 0000 .. .. id vp vi al vm rf

EDX = 00000080 ES:EDI = 0000:00000000 GS = 0000

0000:00007DC5 mov es, [bx+si]

EBDEBUG:

It looks like some BIOS issue

I can perform help command with following output (see attachement)

ANY IDEAS how fix this problems???

Thx

[gabelar]

You're right, this does look like a bios issue. Before you install IPS 50 you need to install a new bios. Check the CCO download Center for the bios upgrade, and the IPS 5x README for the upgrade instructions.