Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

6500 has IDSM-2 and FWSM modules

i got a task to configure Catalyst 6509 supervisor engin sup720-10g-3c  and has FWSM and IDSM-2 service modules .

what consideration should i take  and is  there is any configuration example for both

thank you for your help

1 REPLY

Re: 6500 has IDSM-2 and FWSM modules

They are many posts on this forum on this subject, did you try using the search function?

http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/products_configuration_example09186a00809c37cb.shtml

Regards

Farrukh

391
Views
0
Helpful
1
Replies
CreatePlease to create content