Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

AIM-IPS bootloading problem

Hi

I have a problem to initialize AIM-IPS.

I'm thinking it's problem with BOOTLOADER FILE.

ROUTER#service-module ids-Sensor 0/0 session

[Resuming connection 2 to 10.1.9.1 ... ]

ServicesEngine MFG Failsafe boot-loader > show

IP addr: 10.1.9.2

Netmask: 255.255.255.0

TFTP Server: 10.1.9.1

GW IP adr: 10.1.9.1

eth int: octeth1

Number cores: 2

Default boot: disk

MFG Failsafe Bootloader Version: 1.1.7

Failsafe Bootloader File: pse_mfg_failsafe_1.1.7.bin

Default Bootloader File:

MiniKernel: mini_kernel_1.1.7.64.bz2

ServicesEngine MFG Failsafe boot-loader >

I can't find DEFAULT BOOTLOADER FILE on Cisco's site.

In documentation I found informaction:

http://www.cisco.com/en/US/docs/security/ips/6.1/configuration/guide/cli/cli_obtaining_software.html

Bootloader As needed bl AIM-IPS pse_aim_x.y.z.bin (where x, y, z is the release number)

Can anybody help me ?

Peter

138
Views
0
Helpful
0
Replies