Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

AIP-SSM Clock issue

We have configured our AIP-SSM and synchronized with our NTP servers.show clock commad shows the corrcet time in the CLI

sensor# show clock
16:42:35 GMT+05:30 Sun Mar 28 2010

sensor# show clock detai
16:53:25 GMT+05:30 Sun Mar 28 2010
Time source is NTP

But the time shown in last updated TAB shows the UTC time.Even in my event logs are updated with UTC time stamp only.I have defined the time zone properly.

Capture.JPG

Do i need to configure any thing else to update my timestamp in the event log.

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: AIP-SSM Clock issue

In the later version of IPS, a new column has been added for "Sensor Local Time" within the Event Viewer.

2 REPLIES
Cisco Employee

Re: AIP-SSM Clock issue

In the later version of IPS, a new column has been added for "Sensor Local Time" within the Event Viewer.

New Member

Re: AIP-SSM Clock issue

After the version upgrade clock shows the local time...

Thx for the clarification...

613
Views
0
Helpful
2
Replies
CreatePlease to create content