Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

AIP-SSM info

I have never configured AIP-SSM and looking for a how to guide that is short and to the point... any one got one??

2 REPLIES
New Member

Re: AIP-SSM info

1) login to the ASA and type

#session 1

2) on the IPS prompt type

#setup

3) then fill up the setting based on the questions, and configure the management IP address.

4) configur your PC or LAPTOP with IP address from the same subnets and connect through the GUI interface and then use the Wizard for configuring the sensor.

enjoy

Gold

Re: AIP-SSM info

step 3 1/2 - connect a cable to the management port of the AIP-SSM, this is how you'll be accessing the unit via ssh and https.

191
Views
4
Helpful
2
Replies
CreatePlease to create content