Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

AIP-SSM (Not Applicable)

Hi Experts,

             We have 2ASA and each one have AIP-SSM,with 2nd ASA AIP-SSM I tried to upload latest image for AIP-SSM 20 but didnt worked and now i see module is dead...pls check the detials below.....pls help me out how to make it up or work properly so that i can config other stuff.Pls its very imp and urgent help me out....

ASA-A:

----------

251-DBSi-ASA5540# sh module 1

Mod Card Type                                    Model              Serial No.

--- -------------------------------------------- ------------------ -----------

  1 ASA 5500 Series Security Services Module-20  ASA-SSM-20         JAF11370608

Mod MAC Address Range                 Hw Version   Fw Version   Sw Version

--- --------------------------------- ------------ ------------ ---------------

  1 0007.0e11.e13b to 0007.0e11.e13b  1.0          1.0(11)2     5.1(6)E1

Mod SSM Application Name           Status           SSM Application Version

--- ------------------------------ ---------------- --------------------------

  1 IPS                            Up               5.1(6)E1

Mod Status             Data Plane Status     Compatibility

--- ------------------ --------------------- -------------

  1 Up                 Up

ASA-B:

---------

251-DBSi-ASA5540# sh module 1

Mod Card Type                                    Model              Serial No.

--- -------------------------------------------- ------------------ -----------

  1 ASA 5500 Series Security Services Module-20  ASA-SSM-20         JAF1137060C

Mod MAC Address Range                 Hw Version   Fw Version   Sw Version

--- --------------------------------- ------------ ------------ ---------------

1 001d.4524.a414 to 001d.4524.a414  1.0          1.0(11)2     5.1(6)E1

Mod SSM Application Name           Status           SSM Application Version

--- ------------------------------ ---------------- --------------------------

  1 IPS                            Not Applicable   5.1(6)E1

Mod Status             Data Plane Status     Compatibility

--- ------------------ --------------------- -------------

  1 Recover            Not Applicable

1 REPLY

Re: AIP-SSM (Not Applicable)

Please try rebooting the module, if it does not work recovery it using the following procedure

http://www.cisco.com/en/US/docs/security/ips/5.0/configuration/guide/cli/cliimage.html#wpxref68481

Regards

Farrukh

813
Views
0
Helpful
1
Replies
CreatePlease to create content