Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

AIP-SSM on contexts or transparent

Hello,

I would like to know if its possible to have an AIP-SSM module on a ASA configured in trasparent mode and if its possible to have it in multiple contexts. Two different scenarios. The client wants to know that and I would like to see it on a Cisco document if possible. I think both scenarios are possible but I haven't found any document.

Thanks,

Paul

Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: AIP-SSM on contexts or transparent

Hi Paul,

Here is the link which explains how you can configure multiple virtual sensors and as you can see it is supported on both routed and transaprent mode.

http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/ips.html#wp1087111

Hope this helps.

Thanks,

--Sunil

3 REPLIES
Cisco Employee

Re: AIP-SSM on contexts or transparent

Hi Paul,

Here is the link which explains how you can configure multiple virtual sensors and as you can see it is supported on both routed and transaprent mode.

http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/ips.html#wp1087111

Hope this helps.

Thanks,

--Sunil

Re: AIP-SSM on contexts or transparent

It helped. Thanks a lot my friend.

Cisco Employee

Re: AIP-SSM on contexts or transparent

Yes, you can have an AIP-SSM module on an ASA configured in transparent mode or in multiple contexts.  I could not find a document that mentions trasnparent mode but you'll see reference to multiple context in the documents below:

http://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/ssm.html#wp1097278

http://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/ssm.html#wp1091984

688
Views
0
Helpful
3
Replies
CreatePlease login to create content