Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

AIP-SSM recovery failure

Hi All,

I am trying to upgrade the AIP-SSM software from 5.x to 6.x , i dont know through which interface it contacts to TFTP server i.e external g0/0 or internal. It gives error of TFTP timeout and recovery is not completed. let me know how to upgrade or revert back to default.

4 REPLIES
Gold

Re: AIP-SSM recovery failure

If you have a working 5.x sensor that is reachable via the management interface (you can ssh or https into it), then you can use the upgrade ftp:// command.

But since you're mentioning TFTP, it sounds like you want to re-image, and not upgrade.

Installing the AIP-SSM system image

http://www.cisco.com/en/US/docs/security/ips/6.0/configuration/guide/cli/cliImage.html#wp1032373

New Member

Re: AIP-SSM recovery failure

yes i am trying to reimage the AIP-SSM-10 module and tried with the hw-module module 1 recover configure command. Please tell where should i connect the TFTP server i.e G0/0 port or ?

Gold

Re: AIP-SSM recovery failure

The AIP-SSM10 module has a management port on the module (it is the only external interface on the module). Connect this to the network that can reach your TFTP server.

New Member

Re: AIP-SSM recovery failure

Thanks, it worked and i have upgraded the image to 6.x

200
Views
0
Helpful
4
Replies