I can see from the above that there is a HTTP response error, I have checked and there does not seem to be any other unit stopping the responses. With regards to the ASA config do I need to allow the IPS module though the ACL's or NAT statements?
Management traffic from the AIP-SSM module will use the module's management ethernet interface. To answer your question, it depends on what network (or firewall interface) you have the AIP-SSM Management interface connected to.
Sorry I have not made any progress with this as yet: the only thing I have done is us the packet tracer, which passed I am just going to check the route of the packet once it has left the interface as it has got to be that or the URL is wrong.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...