First of all, we use the autoupdate functionality to upgrade our sensors. I have a test sensor that was upgraded to IPS-K9-min-5.1-1d (from 5.0.6) some time ago. I'm now trying to upgrade the signatures. It is not updating. Instead it seems it has been trying to re-apply the IPS-K9-min-5.1-1d upgrade over and over. I imagine it's been doing this since the upgrade. This is not the first time I've noticed this behavior. Is this a known bug?
evStatus: eventId=1147301912612292606 vendor=Cisco
originator:
hostId: 88-nsmc-c1
appName: mainApp
appInstanceId: 32588
time: June 14, 2006 6:17:00 PM UTC offset=-300 timeZone=GMT-06:00
autoUpgradeServerCheck:
uri: scp://cisco@162.131.88.27//data1/edrm/test/sensorUpdates/
packageFileName: IPS-K9-min-5.1-1d.pkg
result: status=true
evStatus: eventId=1147301912612292610 vendor=Cisco
originator:
hostId: 88-nsmc-c1
appName: mainApp
appInstanceId: 32588
time: June 14, 2006 6:17:04 PM UTC offset=-300 timeZone=GMT-06:00
downloadUpgradeFile:
uri: scp://cisco@162.131.88.27//data1/edrm/test/sensorUpdates/IPS-K9-min-5.1-1d.pkg
result: status=true
evStatus: eventId=1147301912612292611 vendor=Cisco
originator:
hostId: 88-nsmc-c1
appName: mainApp
appInstanceId: 32588
time: June 14, 2006 6:17:04 PM UTC offset=-300 timeZone=GMT-06:00
softwareUpgradeInitiated:
description: Minor update initiated
upgradeName: IPS-K9-min-5.1-1d
oldVersion: IPS-K9-min-5
evStatus: eventId=1147301912612292619 vendor=Cisco
originator:
hostId: 88-nsmc-c1
appName: mainApp
appInstanceId: 32588
time: June 14, 2006 6:17:38 PM UTC offset=-300 timeZone=GMT-06:00
softwareUpgradeCompleted:
description: Update completed with errors
upgradeName: n/a
oldVersion: n/a
newVersion: n/a
result: 5.1(1) is already installed on this system. status=false
