Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

Automatic Updating of AIP-SSM-10 and ASA 5510 (newbie)

I see that it's possible to automate updates of the ASA 5510 and AIP SSM via FTP to my own server. Is it possible to automate the downloads directly from Cisco.com?

Thanks!

Jeremy

1 ACCEPTED SOLUTION

Accepted Solutions
Community Member

Re: Automatic Updating of AIP-SSM-10 and ASA 5510 (newbie)

Jeremy, the answer to your question is that is correct, as far as Cisco products are concerned. So I wrote a PERL app that does exactly this, and I published an article on it in June 2007's issue of Sys Admin magazine. Here is the article online: http://www.samag.com/documents/s=10128/sam0706a/0706a.htm

And it is also on my website, with a tar of the scripts at:

http://www.lhb-consulting.com/pages/apps/index.html

Good luck.

--Lisa

4 REPLIES
Silver

Re: Automatic Updating of AIP-SSM-10 and ASA 5510 (newbie)

Hi Please check below link :

It seems to be steps by step procedure.

Downloading Update Files Automatically

http://www.cisco.com/en/US/products/sw/cscowork/ps3990/products_user_guide_chapter09186a008059e490.html#wp410996

Regards,

Dharmesh Purohit

Community Member

Re: Automatic Updating of AIP-SSM-10 and ASA 5510 (newbie)

So - there is no way to do the updates automatically without purchasing the CiscoWorks VPN/Security Management Solution (VMS)?

Thanks, Dharmesh, for your assistance!

Community Member

Re: Automatic Updating of AIP-SSM-10 and ASA 5510 (newbie)

Jeremy, the answer to your question is that is correct, as far as Cisco products are concerned. So I wrote a PERL app that does exactly this, and I published an article on it in June 2007's issue of Sys Admin magazine. Here is the article online: http://www.samag.com/documents/s=10128/sam0706a/0706a.htm

And it is also on my website, with a tar of the scripts at:

http://www.lhb-consulting.com/pages/apps/index.html

Good luck.

--Lisa

Community Member

Re: Automatic Updating of AIP-SSM-10 and ASA 5510 (newbie)

Awesome, Lisa - thank you very much!

Jeremy

159
Views
9
Helpful
4
Replies
CreatePlease to create content