Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cannot access IPS 4260

Hi guys:

Recently I have a problem with an IPS 4260, I was trying to access through IDM and it won't let me, it always bring this message:

errSystemError-ct-sensorApp.426 not respongin. please check system processes - The connect to specified Io:: ClientPipe failed

In fact I also cannot access through CLI, do you have any suggest.

Regards

Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions
Gold

Cannot access IPS 4260

Have you set the allowed hosts yet?

If you have, is the IP address of the client your using in that list?

Have you rebooted the 4260?

- Bob

3 REPLIES
Gold

Cannot access IPS 4260

Have you set the allowed hosts yet?

If you have, is the IP address of the client your using in that list?

Have you rebooted the 4260?

- Bob

New Member

Cannot access IPS 4260

Bob:

Yes I have allowed the host, well in fact I have allowed the entire network segment. And about the restart of the device I haven't tried I need to schedule that with my customer.

Regards

New Member

Cannot access IPS 4260

Bob:

I already solve the issue, I got access through CLI and I look at the SH VER that one of the engines was stopped so I create a service account which on I could access into the device and restarted the Engines. That solved the problem.

Thank you for your help.

Regards

634
Views
0
Helpful
3
Replies