Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CISCO 4215 ERROR

We are running a Cisco 4215 that is sending the following SNMP error trap but there is not idication of what the error is:

Message: Trap received from sensor with SNMP Varbinds: sysUpTime: 3 days, 4 hours, 23 minutes, 3 seconds. , .1.3.6.1.6.3.1.1.4.1.0: .1.3.6.1.4.1.9.9.138.2.0.1, .1.3.6.1.4.1.9.9.138.1.3.3.1.3: 5, .1.3.6.1.4.1.9.9.138.1.3.3.1.4: 2, .1.3.6.1.4.1.9.9.138.1.3.3.1.5: 4, .1.3.6.1.4.1.9.9.138.1.3.3.1.6: 27498329 END

Device: 192.168.1.16

Category: Switch

Error Condition: Attention

Generated at: Feb 21,2006 11:11:52 PM

1 REPLY
Cisco Employee

Re: CISCO 4215 ERROR

You may want to check out the following MIBs for the IPS sensors:

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/csids/csids11/cliguide/clisnmp.htm#wp1042408

131
Views
0
Helpful
1
Replies